During the choice of tooth color, subjective communication with the laboratory and an incorrect color registration approach can result in a poor color match of a restoration to adjoining tooth and oral buildings.The objective of this cross-sectional research was to match color registration and color matching in a younger Chilean inhabitants with three completely different strategies: visual with a shade information, digital visual with a cross-polarized filter, and instrumental with a spectrophotometer.
A complete of 60 younger volunteers had been chosen for tooth color registration of the maxillary proper central incisor through the use of three completely different strategies. Tooth color registration was carried out utilizing the CIELab and ΔE coordinate system.
Significant variations had been detected between the coordinates recorded by the visual analog method as compared with the opposite 2 strategies. In distinction, no important variations had been discovered between the L∗ and b∗ coordinates of the spectrophotometer and the digital visual method with use of a cross-polarization filter.
The ΔE obtained between the visual shade and spectrophotometer was 7.35, and the ΔE between the digital visual method with the use of a cross-polarization filter and the spectrophotometer was 6.12.No statistically important variations had been noticed within the digital picture with the cross-polarization filter and the spectrophotometer within the L∗ and b∗ coordinate of the CIELab system.
In distinction, the visual analog method led to massive variations with the opposite strategies underneath research. The ΔE of the digital visual method with the use of cross-polarization filters and the spectrophotometer was 6.2, thought-about as an appropriate color mismatch (<ΔE 6.8).
Near-infrared in vivo measurements of photosystem I and its lumenal electron donors with a lately developed spectrophotometer.
In photosynthesis analysis, non-invasive in vivo spectroscopic analyses have been used as a sensible software for learning photosynthetic electron transport. Klas-NIR spectrophotometer has been lately developed by Klughammer and Schreiber (Photosynth Res 128:195-214, 2016) for in vivo measurements of redox modifications of P700, plastocyanin (Pcy) and ferredoxin (Fd).
Here we present examples utilizing the Klas-NIR spectrophotometer for the analysis of the redox states and portions of these parts in plant leaves and cyanobacterial suspensions. The redox poise underneath light of the electron transport parts is completely different in leaves from increased crops in contrast with cyanobacteria.
During a brief illumination with an actinic light, P700, Pcy, and Fd are stored diminished in barley leaves however are oxidized in cyanobacteria. During far-red light illumination, P700 and Pcy are principally oxidized within the leaves however are partially stored diminished in cyanobacteria. In the cyanobacterium, Thermosynechococcus elongatus, which has no Pcy however makes use of cytochrome c6 (cyt c6) because the electron donor to photosystem I, a cyt c6 sign was detected in vivo.
To present the potential of Klas-NIR spectrophotometer for learning completely different developmental phases of a leaf, we carried out measurements on absolutely mature and early senescing barley leaves. Pcy content material in leaves decreased throughout senescence at an early stage.
The Pcy loss was quantitatively analyzed utilizing Klas-NIR spectrophotometer, giving absolute ratios of Pcy to PSI of 2.5 and 1.6 in youthful and older leaves, respectively. For quantification of the indicators in vivo, in vitro knowledge (Sétif et al. in Photosynth Res142:307-319, 2019) obtained with Klas-NIR spectrophotometer had been used.
Development of a Low-Cost UV-Vis Spectrophotometer and Its Application for the Detection of Mercuric Ions Assisted by Chemosensors.
Detection of an environmental contaminant requires the use of costly measurement gear, which limits the conclusion of in situ exams as a result of of their excessive price, their restricted portability, or the prolonged time period of the exams.
This paper presents intimately the event of a transportable low-cost spectrophotometer which, through the use of a specialised chemosensor, permits detection of mercuric ions (Hg2+), offering efficient and correct outcomes.
Design specs for all of the phases assembling the spectrophotometer and the weather chosen to construct them are offered alongside with the method to synthesize the chemosensor and the exams developed to validate its efficiency as compared with a high-precision business laboratory spectrophotometer.
Evaluating the connection between tooth color and enamel thickness, utilizing twin flash images, cross-polarization images, and spectrophotometer.
To perceive (a) the results of labial enamel on tooth color (b) relationship of color knowledge taken by nonpolarized (NP), cross-polarization images (CP), and spectrophotometry (SP).Fifty extracted human maxillary incisors had been coated with resin on their palatal surfaces.
Their color was measured with NP, CP, and SP and their dimensions had been scanned by an intraoral scanner. The labial enamel was eliminated utilizing a modified selective enamel demineralization approach. Tooth dimensions and color had been recorded once more.
The variations within the labial enamel thickness (ΔT) and color (∆E*00 and ∆L*, ∆a*, ∆b*) had been statistically analyzed with the Pearson correlation coefficient and easy linear regression.In CP and SP strategies, ΔT and ∆E*00 had been weakly to reasonably positively correlated (r = .38 and .27). In NP, CP, and SP strategies, ∆T and ∆b* are weakly positively correlated (r = .27, .27 and .29). The color knowledge of three measuring strategies had been extremely positively correlated (r > .8).
(2-Chloro-Phenyl)-Oxo-Acetonitrile |
|||
20-abx186083 | Abbexa |
|
|
(S)-alpha-Bromo-alpha-phenyl acetonitrile |
|||
20-abx181469 | Abbexa |
|
|
2-(5-Bromopyridin-2-yl)acetonitrile |
|||
20-abx181606 | Abbexa |
|
|
Recombinant Corynebacterium Diphtheriae acn Protein (aa 1-934) |
|||
VAng-Lsx3043-inquire | Creative Biolabs | inquire | Ask for price |
Description: Corynebacterium Diphtheriae Aconitate hydratase, recombinant protein. |
|||
Recombinant Legionella Pneumophila acn Protein (aa 1-891) |
|||
VAng-Lsx3634-inquire | Creative Biolabs | inquire | Ask for price |
Description: Legionella Pneumophila Aconitate hydratase, recombinant protein. |
|||
D(+)-Trehalose dihydrate , ≥ 99% (HPLC) |
|||
T1036-010 | GenDepot | 100g | 273 EUR |
D(+)-Trehalose dihydrate , ≥ 99% (HPLC) |
|||
T1036-025 | GenDepot | 250g | 471 EUR |
Recombinant SARS ACN Protein (aa 1-49, 192-220) |
|||
VAng-Lsx0068-inquire | Creative Biolabs | inquire | Ask for price |
Description: SARS ACN (aa 1-49, 192-220), recombinant protein from E. coli. |
|||
2-(4-Hydroxy-2-oxoindolin-3-yl)acetonitrile |
|||
TBP02919 | ChemNorm | unit | Ask for price |
Block, 15 x HPLC or Cryovial tubes |
|||
BCM1405-B1232 | Bio Basic | 1 pcs, 1 UNIT | 162.3 EUR |
Antifreeze Polypeptide (AFP) (HPLC-6), Winter Flounder |
|||
5-00714 | CHI Scientific | 4 x 1mg | Ask for price |
1-Hexanesulfonic acid sodium salt, HPLC grade |
|||
GK0100-100G | Glentham Life Sciences | 100 g | 253 EUR |
1-Hexanesulfonic acid sodium salt, HPLC grade |
|||
GK0100-25G | Glentham Life Sciences | 25 g | 102 EUR |
1-Hexanesulfonic acid sodium salt, HPLC grade |
|||
GK0100-50G | Glentham Life Sciences | 50 g | 158 EUR |
1-Octanesulfonic acid sodium salt, HPLC grade |
|||
GK3339-100G | Glentham Life Sciences | 100 g | 237 EUR |
1-Octanesulfonic acid sodium salt, HPLC grade |
|||
GK3339-25G | Glentham Life Sciences | 25 g | 94 EUR |
1-Octanesulfonic acid sodium salt, HPLC grade |
|||
GK3339-50G | Glentham Life Sciences | 50 g | 146 EUR |
1-Heptanesulfonic acid sodium salt, HPLC grade |
|||
GK4832-100G | Glentham Life Sciences | 100 g | 245 EUR |
1-Heptanesulfonic acid sodium salt, HPLC grade |
|||
GK4832-25G | Glentham Life Sciences | 25 g | 102 EUR |
1-Heptanesulfonic acid sodium salt, HPLC grade |
|||
GK4832-50G | Glentham Life Sciences | 50 g | 150 EUR |
1-Butanesulfonic acid sodium salt, HPLC grade |
|||
GK2430-100G | Glentham Life Sciences | 100 g | 237 EUR |
1-Butanesulfonic acid sodium salt, HPLC grade |
|||
GK2430-25G | Glentham Life Sciences | 25 g | 94 EUR |
1-Butanesulfonic acid sodium salt, HPLC grade |
|||
GK2430-50G | Glentham Life Sciences | 50 g | 146 EUR |
dNTP Mixtures ,10mM each , >99% by HPLC |
|||
D0610-050 | GenDepot | 500ul | 91 EUR |
dNTP Mixtures ,10mM each , >99% by HPLC |
|||
D0610-100 | GenDepot | 10ml | 396 EUR |
dNTP Mixtures ,10mM each , >99% by HPLC |
|||
D0610-105 | GenDepot | 10x500ul | 286 EUR |
dNTP Mixtures ,10mM each , >99% by HPLC |
|||
D0610-205 | GenDepot | 20x500ul | 448 EUR |
dNTP Mixtures ,10mM each , >99% by HPLC |
|||
D0610-500 | GenDepot | 50ml | 1684 EUR |
2-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)acetonitrile |
|||
20-abx181601 | Abbexa |
|
|
2-[3-(2,6-Dichlorophenyl)-5-Methylisoxazol-4-Yl]Acetonitrile |
|||
abx185014-1g | Abbexa | 1 g | 982 EUR |
Holder for Plasmid Midi, Maxi and Maxi plus, Ion Exchange column |
|||
FAPDE-holder-for-ion-exchange | Favorgen | 1 prep | 158 EUR |
1-Hexanesulfonic acid sodium salt monohydrate, HPLC grade |
|||
GK8349-100G | Glentham Life Sciences | 100 g | 253 EUR |
1-Hexanesulfonic acid sodium salt monohydrate, HPLC grade |
|||
GK8349-25G | Glentham Life Sciences | 25 g | 102 EUR |
1-Hexanesulfonic acid sodium salt monohydrate, HPLC grade |
|||
GK8349-50G | Glentham Life Sciences | 50 g | 158 EUR |
Human CD28 Protein (Asn 19-Pro 152) [Fc] ((HPLC-verified)) |
|||
VAng-1239Lsx-100g | Creative Biolabs | 100 µg | 545 EUR |
Description: Human / Cynomolgus / Rhesus macaque CD28, Fc Tag (HPLC-verified), is expressed in HEK 293 cells. (Uniprot ID: P10747-1) |
|||
Human CD28 Protein (Asn 19-Pro 152) [Fc] ((HPLC-verified)) |
|||
VAng-1239Lsx-1mg | Creative Biolabs | 1 mg | 3349 EUR |
Description: Human / Cynomolgus / Rhesus macaque CD28, Fc Tag (HPLC-verified), is expressed in HEK 293 cells. (Uniprot ID: P10747-1) |
|||
Human CD47 Protein (Gln 19-Pro 139) [Fc] (HPLC-verified) |
|||
VAng-1332Lsx-100g | Creative Biolabs | 100 µg | 848 EUR |
Description: Human CD47, Fc tag (HPLC-verified), is expressed in HEK 293 cells. (Uniprot ID: NP_942088) |
|||
Human CD47 Protein (Gln 19-Pro 139) [Fc] (HPLC-verified) |
|||
VAng-1332Lsx-1mg | Creative Biolabs | 1 mg | 5494 EUR |
Description: Human CD47, Fc tag (HPLC-verified), is expressed in HEK 293 cells. (Uniprot ID: NP_942088) |
|||
Human LAG3 Protein (Leu 23-Leu 450) [Fc] (HPLC-verified) |
|||
VAng-1869Lsx-100g | Creative Biolabs | 100 µg | 875 EUR |
Description: Human LAG3 protein, human IgG1 Fc tag, HPLC-verified, expressed in human 293 cells. (Uniprot ID: P18627-1) |
|||
Human LAG3 Protein (Leu 23-Leu 450) [Fc] (HPLC-verified) |
|||
VAng-1869Lsx-1mg | Creative Biolabs | 1 mg | 5824 EUR |
Description: Human LAG3 protein, human IgG1 Fc tag, HPLC-verified, expressed in human 293 cells. (Uniprot ID: P18627-1) |
|||
Human NKG2D Protein (Ile 73-Val 216) [His] (HPLC-verified) |
|||
VAng-2607Lsx-100g | Creative Biolabs | 100 µg | 875 EUR |
Description: Human NKG2D (CD314) protein, His tag, HPLC-verified, was expressed in human 293 cells. (Uniprot ID: P26718-1) |
|||
Human NKG2D Protein (Ile 73-Val 216) [His] (HPLC-verified) |
|||
VAng-2607Lsx-1mg | Creative Biolabs | 1 mg | 5494 EUR |
Description: Human NKG2D (CD314) protein, His tag, HPLC-verified, was expressed in human 293 cells. (Uniprot ID: P26718-1) |
|||
Human OX40L Protein (Gln 51-Leu 183) [His] (active trimer) (HPLC-verified) |
|||
VAng-2647Lsx-1mg | Creative Biolabs | 1 mg | 7199 EUR |
Description: Human OX40L protein, human IgG1 Fc tag (active trimer) (HPLC-verified), was expressed in human 293 cells. (Uniprot ID: NP_003317) |
|||
Human OX40L Protein (Gln 51-Leu 183) [His] (active trimer) (HPLC-verified) |
|||
VAng-2647Lsx-50g | Creative Biolabs | 50 µg | 1095 EUR |
Description: Human OX40L protein, human IgG1 Fc tag (active trimer) (HPLC-verified), was expressed in human 293 cells. (Uniprot ID: NP_003317) |
|||
Custom Peptide Synthesis (>90%; mass spec, hplc (mg-kg size, price based upon peptide size: 2-100 aa) |
|||
PEP-90 | Alpha Diagnostics | 1 | Ask for price |
Custom Peptide Synthesis (>95; mass spec, hplc (mg-kg size, price based upon peptide size: 2-100 aa) |
|||
PEP-95 | Alpha Diagnostics | 1 | Ask for price |
Custom Peptide Synthesis (>70% antigen grade; mass spec, hplc (mg-kg size, price based upon peptide size: 2-100 aa) |
|||
PEP-70 | Alpha Diagnostics | 1 | Ask for price |
Adaptor for flexible plates, accessory for AgileSealer? |
|||
APS-200-FP | ACTGene | 351 EUR | |
Sample comb for batching for AE-6110 |
|||
2398313 | Atto | unit | 100 EUR |
Description: (90mm・r efer ence at t ached・1.5mm t i ck ness) |
|||
gelcaster for sequencer |
|||
ESEQ1000-CAST | Consort | ea | 437 EUR |
Stand for D1000 |
|||
BCM1237 | Bio Basic | 1 pcs, 1 UNIT | 556.7 EUR |
For-Ala-OH |
|||
5-02335 | CHI Scientific | 25g | Ask for price |
For-Ala-OH |
|||
5-02336 | CHI Scientific | 100g | Ask for price |
For-Val-OH |
|||
5-03697 | CHI Scientific | 25g | Ask for price |
For-Val-OH |
|||
5-03698 | CHI Scientific | 100g | Ask for price |
Antibody for CD9 |
|||
SPC-1272D | Stressmarq | 0.1ml | 314 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is unconjugated. |
|||
Antibody for CD9 |
|||
SPC-1272D-A390 | Stressmarq | 0.1ml | 361 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 390. |
|||
Antibody for CD9 |
|||
SPC-1272D-A488 | Stressmarq | 0.1ml | 360 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 488. |
|||
Antibody for CD9 |
|||
SPC-1272D-A565 | Stressmarq | 0.1ml | 360 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 565. |
|||
Antibody for CD9 |
|||
SPC-1272D-A594 | Stressmarq | 0.1ml | 360 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 594. |
|||
Antibody for CD9 |
|||
SPC-1272D-A633 | Stressmarq | 0.1ml | 360 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 633. |
|||
Antibody for CD9 |
|||
SPC-1272D-A655 | Stressmarq | 0.1ml | 360 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 655. |
|||
Antibody for CD9 |
|||
SPC-1272D-A680 | Stressmarq | 0.1ml | 360 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 680. |
|||
Antibody for CD9 |
|||
SPC-1272D-A700 | Stressmarq | 0.1ml | 360 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 700. |
|||
Antibody for CD9 |
|||
SPC-1272D-ALP | Stressmarq | 0.1ml | 355 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Alkaline Phosphatase. |
|||
Antibody for CD9 |
|||
SPC-1272D-APC | Stressmarq | 0.1ml | 359 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to APC . |
|||
Antibody for CD9 |
|||
SPC-1272D-APCCY7 | Stressmarq | 0.1ml | 432 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to APC/Cy7. |
|||
Antibody for CD9 |
|||
SPC-1272D-BI | Stressmarq | 0.1ml | 357 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Biotin. |
|||
Antibody for CD9 |
|||
SPC-1272D-DY350 | Stressmarq | 0.1ml | 436 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Dylight 350. |
|||
Antibody for CD9 |
|||
SPC-1272D-DY405 | Stressmarq | 0.1ml | 412 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Dylight 405. |
|||
Antibody for CD9 |
|||
SPC-1272D-DY488 | Stressmarq | 0.1ml | 393 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Dylight 488. |
|||
Antibody for CD9 |
|||
SPC-1272D-DY594 | Stressmarq | 0.1ml | 397 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Dylight 594. |
|||
Antibody for CD9 |
|||
SPC-1272D-DY633 | Stressmarq | 0.1ml | 387 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Dylight 633. |
|||
Antibody for CD9 |
|||
SPC-1272D-FITC | Stressmarq | 0.1ml | 353 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to FITC. |
|||
Antibody for CD9 |
|||
SPC-1272D-HRP | Stressmarq | 0.1ml | 349 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to HRP. |
|||
Antibody for CD9 |
|||
SPC-1272D-P594 | Stressmarq | 0.1ml | 367 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to PE/ATTO 594. |
|||
Antibody for CD9 |
|||
SPC-1272D-PCP | Stressmarq | 0.1ml | 359 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to PerCP. |
|||
Antibody for CD9 |
|||
SPC-1272D-RPE | Stressmarq | 0.1ml | 358 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to RPE . |
|||
Antibody for CD9 |
|||
SPC-1272D-STR | Stressmarq | 0.1ml | 359 EUR |
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Streptavidin. |
|||
Antibody for KDEL |
|||
SPC-109A | Stressmarq | 0.05mg | 205 EUR |
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is unconjugated. |
|||
Antibody for KDEL |
|||
SPC-109B | Stressmarq | 0.2mg | 350 EUR |
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is unconjugated. |
|||
Antibody for KDEL |
|||
SPC-109B-A390 | Stressmarq | 0.2mg | 439 EUR |
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 390. |
|||
Antibody for KDEL |
|||
SPC-109B-A488 | Stressmarq | 0.2mg | 436 EUR |
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 488. |
|||
Antibody for KDEL |
|||
SPC-109B-A565 | Stressmarq | 0.2mg | 436 EUR |
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 565. |
|||
Antibody for KDEL |
|||
SPC-109B-A594 | Stressmarq | 0.2mg | 436 EUR |
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 594. |
|||
Antibody for KDEL |
|||
SPC-109B-A633 | Stressmarq | 0.2mg | 436 EUR |
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 633. |
|||
Antibody for KDEL |
|||
SPC-109B-A655 | Stressmarq | 0.2mg | 436 EUR |
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 655. |
|||
Antibody for KDEL |
|||
SPC-109B-A680 | Stressmarq | 0.2mg | 436 EUR |
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 680. |
|||
Antibody for KDEL |
|||
SPC-109B-A700 | Stressmarq | 0.2mg | 436 EUR |
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 700. |
|||
Antibody for KDEL |
|||
SPC-109B-ALP | Stressmarq | 0.2mg | 425 EUR |
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Alkaline Phosphatase. |
|||
Antibody for KDEL |
|||
SPC-109B-APC | Stressmarq | 0.2mg | 435 EUR |
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to APC . |
|||
Antibody for KDEL |
|||
SPC-109B-APCCY7 | Stressmarq | 0.2mg | 585 EUR |
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to APC/Cy7. |
A linear relationship between ∆E*00 and ∆T had been discovered (CP and SP teams).(a) Thicker labial enamel has a better influence on tooth color. (b) Reducing labial enamel thickness shifts the tooth color towards yellow. (c) Tooth color measured from the three strategies had been extremely correlated.Knowing the connection between enamel thickness and tooth color, a clinician can higher predict the stump shade earlier than tooth preparation. Due to the extremely correlated measuring outcomes, it’s affordable to mix these three strategies throughout shade matching.